![]() |
| | LinkBack | Thread Tools | Display Modes |
| |||
| I have just gotten into RYO. But when I use ryo pipe tobacco. i keep loosing the fire in my lap. If I pack cigs tighter. Hard to smoke. I bought a couple packages of Bugler and packed very nice and fire stays on cigarette. But as you all know to buy straight up cigarette tobacco is about 3x more expensive that RYO pipe tobacco. Any suggestions for a specific brand of ryo pipe tobacco that is cut more like cigarette tobacco ?? I like Camel filters and Marb. red type smokes.. Thanks in advance. |
| |||
| Do you use a crank style injector or do you acually roll them yourself? Im very new to RYO and I use the top-o-matic and Ive yet to have any problems with falling cherries or over-stuffing. |
| |||
|
| |||
| Aren't ya'll fancy? I just got a hand stuffer thingie, and honestly, from reading some of these threads I think everyone should start with one... Not to say I won't be purchasing a cranky style stuffer, since I know this one works, can only get better? |
| |||
| Yes. The auger style machines are simply rotten pieces of junk. They save no more time over a crank style. What they do is cause hot burning ash to fall. I wasted my money and time on one and then gave up. I bought one with a crank and now I can "grandma" my ash at least a quarter way through. It's not a habit, but it was a test. When the ash finally fell, it was flame free. |
| |||
| To make a good stick that will normally stay together you need to do several things. First is to dry your tobacco a bit. Solar dry it or use an oven. If you over dry it then pack those smokes in a humidor that contains distilled water for several days before smoking. Dry tobacco will allow you to better control the cigarette density and it packs far more evenly, hence less loss of the bud. Way back when (before all the chemical additives) losing the bud happened with the best of brands. Folks had bud burn holes in their carpets as well as their Sunday best clothes. It was a major complaint even in the "old days." The second and equally important is to rag the tobacco. Pipe cut is the same tobacco as cigarette tobacco only cut wider and longer. Go to the dollar store and buy a $1 pair of scissors (use one owned by your significant other at your own risk). Grab a handful of tobacco and start snipping away at the edges of the ball into a container. Do that for as much tobacco as you plan on using. Try it making a few sticks and smoke them. If the problem isn't completely alleviated then take what you have ragged and rag it again. I always double rag mine. Seems to work like a charm. |
| ||||
| I've just recently ( in the past 2-3 weeks ) started rolling my own cigarettes and someone recommended the little Gambler slide type rolling machine which sells for around 6 bucks in most convenience stores and uses the paper tubes. I stank at it at first and had lots of bent paper tubes, fire and tobacco falling off my cigarette after I lit it and would burn me and my t-shirt or robe. I also had cigarettes with an empty end, ( no tobacco in the end you light ) soft spots in the cigarette, and tobacco just falling out after I rolled one, but even before I lit it. etc. etc. Think I've pretty much taken care of most of my problems, though. Hated the harshness of the only reasonably priced pipe tobacco ( no brand of cigarette rolling tobacco is reasonably priced to me ) which is Cherokee brand at 9.39 per 16 oz. bag. I took care of the harshness by switching to the Cherokee MELLOW blend. The burning ends falling off I've stopped having since I started shredding my tobacco a bit before I roll it. I lay out about enough for 30 cigarette and tear it up a bit by hand or sometimes cut the bunches of strips just a little with scissors. ( I tried grinding up the tobacco but it made it too fine ). Tearing or shredding it just a little works best. I stopped having the empty ends of cigarettes when I learned to slide back the machine after opening the top once more after I'm done rolling one and letting the machine eject the cigarette instead of dummy me pulling it out. I also stopped having a lot of jammed cigarettes by making sure not to overfill the slot and to dry my tobacco for the single rolling session about 30 minutes or so before rolling. ( not as necessary with the Mellow tobacco ) Any longer drying time, to me, effects the taste of the tobacco and makes it a little old ( stale ) tasting. At around $7.50 per carton rolling my own, I'm pretty satisfied now. Last edited by StoneMonkey; 12-20-2011 at 08:23 PM. |
![]() |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
| |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Fire safe Djarum Specials | PiccoloNamek | Fire Safe Cigarettes - FSC Cigarettes | 4 | 11-08-2010 05:22 AM |
| How about we fire our employees for not smoking? | CamelMan324 | Smokers Rights | 3 | 10-12-2009 06:56 PM |
| Senecas will become fire-safe cigs | cooljay788 | Fire Safe Cigarettes - FSC Cigarettes | 1 | 03-29-2009 05:46 PM |
| Fire Safe Cigarette Paper | bobbyT | General Smokers Discussion | 5 | 02-05-2009 02:56 PM |
| Fire Safe? | p-funk madness | General Smokers Discussion | 4 | 01-13-2009 06:22 PM |